SFX 200
Development times
Open in the calculator ›| Developer | Dilution | EI | Temp | Time | Agitation | Source |
|---|---|---|---|---|---|---|
| ID-11 | 1+1 | 200 | 20.0 °C | 17:00 | Ilford — 4 inversions every 60 s | |
| ID-11 | stock | 200 | 20.0 °C | 10:00 | Ilford — 4 inversions every 60 s | |
| Ilfosol 3 | 1+14 | 200 | 20.0 °C | 9:00 | Ilford — 4 inversions every 60 s | |
| Ilfosol 3 | 1+9 | 200 | 20.0 °C | 6:00 | Ilford — 4 inversions every 60 s | |
| Ilfotec DD-X | 1+4 | 200 | 20.0 °C | 10:00 | Ilford — 4 inversions every 60 s | |
| Ilfotec HC | 1+15 | 200 | 20.0 °C | 5:00 | Ilford — 4 inversions every 60 s | |
| Ilfotec HC | 1+31 | 200 | 20.0 °C | 9:00 | Ilford — 4 inversions every 60 s | |
| Ilfotec LC29 | 1+19 | 200 | 20.0 °C | 9:00 | Ilford — 4 inversions every 60 s | |
| Ilfotec LC29 | 1+29 | 200 | 20.0 °C | 11:00 | Ilford — 4 inversions every 60 s | |
| Ilfotec LC29 | 1+9 | 200 | 20.0 °C | 5:00 | Ilford — 4 inversions every 60 s | |
| Microphen | 1+1 | 200 | 20.0 °C | 15:30 | Ilford — 4 inversions every 60 s | |
| Microphen | stock | 200 | 20.0 °C | 8:30 | Ilford — 4 inversions every 60 s | |
| Perceptol | 1+1 | 200 | 20.0 °C | 20:00 | Ilford — 4 inversions every 60 s | |
| Perceptol | stock | 200 | 20.0 °C | 14:30 | Ilford — 4 inversions every 60 s | |
| D-76 | 1+1 | 200 | 20.0 °C | 14:30 | Ilford — 4 inversions every 60 s | |
| D-76 | stock | 200 | 20.0 °C | 10:00 | Ilford — 4 inversions every 60 s | |
| HC-110 | Dilution A (1+15) | 200 | 20.0 °C | 5:00 | Ilford — 4 inversions every 60 s | |
| HC-110 | Dilution B (1+31) | 200 | 20.0 °C | 9:00 | Ilford — 4 inversions every 60 s | |
| T-Max Developer | 1+4 | 200 | 20.0 °C | 8:30 | Ilford — 4 inversions every 60 s | |
| XTOL | stock | 200 | 20.0 °C | 7:00 | Ilford — 4 inversions every 60 s | |
| Ilfotec DD | 1+4 | 200 | 24.0 °C | 8:30 | Machine — continuous | |
| T-Max RS | stock | 200 | 24.0 °C | 6:00 | Machine — continuous | |
| XTOL | stock | 200 | 24.0 °C | 7:00 | Machine — continuous | |
| Ilfotec RT Rapid | 1+1+2 | 200 | 26.0 °C | 0:54 | Machine — continuous | |
| Ilfotec RT Rapid | 1+1+5 | 200 | 26.0 °C | 1:05 | Machine — continuous | |
| Fomadon Excel W27 | stock | 200 | 20.0 °C | 9:00 | — | |
| Fomadon LQN | 1+10 | 200 | 20.0 °C | 9:00 | — | |
| Fomadon R09 | 1+50 | 200 | 20.0 °C | 15:00 | — |
Development times by developer
17 developers
- SFX 200 in D-76 4
- SFX 200 in Fomadon Excel W27 1
- SFX 200 in Fomadon LQN 1
- SFX 200 in Fomadon R09 1
- SFX 200 in HC-110 6
- SFX 200 in ID-11 4
- SFX 200 in Ilfosol 3 4
- SFX 200 in Ilfotec DD 3
- SFX 200 in Ilfotec DD-X 2
- SFX 200 in Ilfotec HC 6
- SFX 200 in Ilfotec LC29 7
- SFX 200 in Ilfotec RT Rapid 6
- SFX 200 in Microphen 5
- SFX 200 in Perceptol 2
- SFX 200 in T-Max Developer 3
- SFX 200 in T-Max RS 3
- SFX 200 in XTOL 5
Link to this page
Specification
- Base
- Acetate
- Emulsion
- —
- Spectral sensitivity
-
Panchromatic — what this means
Sensitive to the whole visible spectrum, so colours turn into greys roughly the way the eye weighs them. This is what almost every general-purpose black and white film is. It has to be loaded and developed in complete darkness — no safelight is safe for it.
- Grain (RMS)
- —
- Resolving power line pairs / mm
- —
- Maximum density
- —
- Latitude over
- —
- Latitude under
- —
- First released
- 2007
A dash means the figure has not been read off a datasheet. Nothing here is estimated.
Long exposures
Reciprocity
| Metered | Expose |
|---|---|
| 1 s | 1 s |
| 2 s | 2.7 s |
| 5 s | 10 s |
| 10 s | 27 s |
| 30 s | 2 min 10 s |
| 1 min 00 s | 5 min 49 s |
| 2 min 00 s | 15 min 40 s |
| 5 min 00 s | 58 min 06 s |
Tc = Tm^P for metered times over 1 s; 1 s or less needs no correction (P = 1.43)
Compare with…
Help keep it right
Suggest a time or report a mistake.
Know a time for SFX 200 that is missing here, or spotted one that is wrong? Tell us, with the source, and a curator will check it.
- Sources only. We publish a time only when it has been read off a primary source: the maker’s datasheet or chart. A link to it is what lets us check yours.
- Nothing goes up by itself. Every report is read by a person before anything on the page changes.
- No account needed. Your name and email are optional, and only to reply to you.
0 reviews
Written by photographers, under their own profile — so you can see what they shoot before you weigh what they say.
0 comments
Notes on how this behaves in practice — what it does in the field is worth as much as what the datasheet says.
No comments yet. Be the first to say how it actually behaves.