Skip to content

Tools

Development calculator

Choose a film and a developer, then the dilution, speed and temperature the time was published for. You get the maker’s time with the datasheet it came from — and, if you need them, corrections for a warmer bath (NegaKit’s rule) or a reused developer (the maker’s own rule, where it publishes one).

Develop for 3:15

  1. Film

    513 films have published times.

    Revolog 460 nm · ISO 200 · C-41

  2. Developer

    Only developers with published times for this film.

    ADOX C-TEC C-41 Negative Kit 2 times CineStill Cs41 Color Simplified Kit 7 times Flic Film C-41 Home Processing Eco Kit 2 times JOBO C-41 Colour Negative Developing Kit 1 time

  3. Dilution

    The only one published for this choice.

    working solution

  4. Speed

    The only one published for this choice.

    EI 200 box speed

  5. Temperature

    The only one published for this choice.

    38 °C

How the numbers are worked out

Only what is published

Every time is a maker’s or a source’s own, read off the datasheet linked beside it. Speeds, dilutions and temperatures are the ones published: nothing is extrapolated, so a push nobody published is simply not on the list.

A warmer or cooler bath

For black-and-white film only, and only between 18 and 26 °C: about 9 % shorter for each degree warmer, rounded to 5 seconds. It is the rule NegaKit’s developing timer uses, which follows Ilford’s and Kodak’s temperature charts closely in that range. Colour processes and monobaths are not corrected.

A reused developer

Only where the maker publishes a rule for a reused developer, and then the maker’s own, with its words and a link to the sheet. A maker that is silent gets no correction: the page says so rather than borrow a percentage. Where the rule is printed for a fixed volume, we scale it to your tank in proportion, and past the maker’s stated capacity we tell you to mix fresh developer.