Skip to content

Tools

Development calculator

Choose a film and a developer, then the dilution, speed and temperature the time was published for. You get the maker’s time with the datasheet it came from — and, if you need them, corrections for a warmer bath (NegaKit’s rule) or a reused developer (the maker’s own rule, where it publishes one).

  1. Film

    513 films have published times.

    Bergger Pancro 400 · ISO 400 · B&W

  2. Developer

    Only developers with published times for this film.

    ADOX Rodinal 7 times Bergger BER49 8 times Bergger Berspeed 12 times Bergger PMK 7 times Bergger Superfine 5 times Compard R09 One Shot 7 times Compard R09 Studio 1 time Kodak D-76 8 times Kodak HC-110 4 times Kodak XTOL 8 times Rollei Supergrain 4 times

  3. Dilution, speed and temperature

How the numbers are worked out

Only what is published

Every time is a maker’s or a source’s own, read off the datasheet linked beside it. Speeds, dilutions and temperatures are the ones published: nothing is extrapolated, so a push nobody published is simply not on the list.

A warmer or cooler bath

For black-and-white film only, and only between 18 and 26 °C: about 9 % shorter for each degree warmer, rounded to 5 seconds. It is the rule NegaKit’s developing timer uses, which follows Ilford’s and Kodak’s temperature charts closely in that range. Colour processes and monobaths are not corrected.

A reused developer

Only where the maker publishes a rule for a reused developer, and then the maker’s own, with its words and a link to the sheet. A maker that is silent gets no correction: the page says so rather than borrow a percentage. Where the rule is printed for a fixed volume, we scale it to your tank in proportion, and past the maker’s stated capacity we tell you to mix fresh developer.